Full Version: Adjustable Fuel Screw
Do you have the adjustable fuel screw for the stock carb for a Z? If so much much for members?
QUOTE (PedroZur @ Jan 29 2007, 03:11 PM) 
Do you have the adjustable fuel screw for the stock carb for a Z? If so much much for members?
I know they sell them I bought one about 2 weeks ago but it fell out last weekend.I should of checked it before I rode.I guess I will have to get another.
Yup, I've got them, they are available on my website, the link is below. Look in the fuel/air section.
Suzuki88, did you make sure when you swapped screws that the spring, washer, and o-ring were in place? Also you don't want to run them more than 3.5 turns fro lack of spring tension.
Paul
Suzuki88, did you make sure when you swapped screws that the spring, washer, and o-ring were in place? Also you don't want to run them more than 3.5 turns fro lack of spring tension.
Paul
QUOTE (advantagecycle @ Jan 31 2007, 09:32 PM)
Yup, I've got them, they are available on my website, the link is below. Look in the fuel/air section.
Suzuki88, did you make sure when you swapped screws that the spring, washer, and o-ring were in place? Also you don't want to run them more than 3.5 turns fro lack of spring tension.
Paul
Suzuki88, did you make sure when you swapped screws that the spring, washer, and o-ring were in place? Also you don't want to run them more than 3.5 turns fro lack of spring tension.
Paul
Yes the spring and washers were on.Just my own fault I should of checked before I rode.Actually I was about to check but someone at the track started to talk to me and I lost track.Paul will a fuel screw from an fcr work. I have one it does fit but it looks like the tip that goes into the carb has a little more space it between than the mikuni.Thanks.
No, the Keihins are different.
Lol, though, don't feel bad, I've had those days too!!
Paul
Lol, though, don't feel bad, I've had those days too!!
Paul
Sorry to hijack your thread.
Paul, I want one of the extended screws also. I tried PMing you but your box is full. I need to talk to you about the yosh screen and quite core. Any luck? Darrell
Paul, I want one of the extended screws also. I tried PMing you but your box is full. I need to talk to you about the yosh screen and quite core. Any luck? Darrell
Hmmm, I am not sure exactly what you are asking, but to answer your first query......my email, advantagecycle@aol.com (there is a link in my signature, or a simple phonecall is the best way to get ahold of the shop.
I've noted several different places, but the site PM's take way to long to mill through, I can answer direct emails much faster.
Paul
I've noted several different places, but the site PM's take way to long to mill through, I can answer direct emails much faster.
Paul
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.