Hi i have a Z and wanted to clean up the bars but do not know what to do with the choke i was wondering where to put it and where to buy it and also if there are also any topics on what wires are what could you send me the link any help would be appreciated

Thanks

pull choke is what ya need, it screws right into your stock carb
http://advantagecyclelc.com/showproduct.ph...p;catId=16#prod

K thanks and this will work on the stock carb?

yep screws right in and you can get rid of the choke cable

not to be harsh but cant you read???? I said "it screws right into your stock carb"

Sorry just got back from track kinda tired i live in AZ it was like 110 degrees out there haha but thanks man i just ordered it i want to get rid of that black blob on the bars for looks and it gives me blisters on the outside of my thumb

i have a copy of the wiring diagrams. what year is your z?

if you have enough time, you can gut out alot of the stock harness. and luckily i have that time...

I have an 06

email address? if i host it, it shrinks it down and you can't see anything

rinehart_mitch@yahoo.com

I have an '03, any chance of getting a copy of that diagram to zjguy721@att.net

Any tips on getting rid of the extra junk on the bars? I got rid of the dash with a Dr. D and moved the lights, now want to clean up the rest. Should I get a carb mounted choke too?

just search "black blob removal" and you will find some info. yes get a carb mounted choke.

Black Blob removal doesn't really bring anything up. Also the thread with the removal is on LT-R450 central. The wiring is the same so we use the link over here. But here is the link anyway.....

Clean up the bars

Wow this is an old thread, but ya, go to advantage cycle and get the choke or the DRZ one from a dealer... and follow joshes link thats what i used...

OK, I do have a question about removing the blob. It may be obvious, but better to ask and be sure.

I get a starter button to replace the starter on the blob: check

I get a tether to replace the off/run switch: check

What about the high/low switch? Do I just wire it for one or the other? Any other ideas, like putting a toggle somewhere?

just wire to low since high is in the trees anyway

I wired both mine together so high and low are on together and havent had any problems. I know a lotta other people have done that too

Werd!

I've had mine wired together for over 2 years now and have zero issues.